Denon AVR-A10H - Black

Description

13.4-Channel Processing and 13 × 150 W Amplification

The AVR-A10H processes up to 13.4 channels (for example 7.4.6 in Dolby Atmos) and amplifies 13 channels at 150 W per channel into 8 ohms (20 Hz-20 kHz, THD 0.05%, two channels driven). It decodes Dolby Atmos, DTS:X Pro, Auro-3D, and IMAX Enhanced, with Auro-Matic and Dolby Surround for upmixing non-native sources. A high-rigidity chassis, toroidal transformer, and channel-by-channel discrete amplifier layout aim to stabilize current delivery during multichannel dynamic peaks.

HDMI 2.1 (8K/60, 4K/120), Dolby Vision, HDR10+, and I/O

The rear panel provides 7 HDMI inputs and 3 HDMI outputs to HDMI 2.1, with 8K at 60 Hz, 4K at 120 Hz, HDCP 2.3, HDR10, HDR10+, and Dolby Vision. One HDMI output supports eARC to receive immersive audio from a TV or ARC source. Four independent subwoofer outputs allow separate delay, level, and equalization per subwoofer, and Dirac Live Bass Control is available as an optional upgrade.

Room Correction and HEOS Built-In Streaming

The AVR-A10H includes Audyssey MultEQ XT32 (multi-position measurement via the included microphone). It is compatible with Dirac Live Room Correction and Dirac Live Bass Control: Dirac licenses are purchased separately and installed online. On the streaming side, HEOS Built-In provides direct access to Spotify Connect, TIDAL, Amazon Music, Deezer, TuneIn, and Roon; Apple AirPlay 2 and Bluetooth are supported, along with dual-band Wi-Fi and an Ethernet port. An included microphone handles Audyssey calibration, and IP/RS-232 control is available for custom-integration platforms.

Common Questions

How much power does the AVR-A10H deliver?

Denon rates the amplifier at 150 W per channel into 8 ohms, measured 20 Hz to 20 kHz at 0.05% THD with two channels driven. As with any AV receiver, the actual per-channel power available in a multichannel scene depends on how many channels are driven at once and on the speaker impedance.

Does the AVR-A10H support Dirac Live?

Yes. The receiver is compatible with Dirac Live Room Correction and Dirac Live Bass Control. The corresponding licenses are purchased separately from Dirac; once activated, they replace the Audyssey MultEQ XT32 room correction and enable multi-subwoofer optimization through Bass Control.

How many subwoofers can be connected, and how independently?

The AVR-A10H has four independent RCA subwoofer outputs. Each output can carry its own delay, level, and equalization, allowing a multi-subwoofer setup to smooth low-frequency response across the room; Dirac Live Bass Control adds a further layer of optimization when licensed.

How do the HDMI inputs handle 4K gaming and 8K video?

All HDMI inputs are HDMI 2.1: they pass 8K at 60 Hz, 4K at 120 Hz, HDCP 2.3, HDR10, HDR10+, and Dolby Vision. They also support VRR, ALLM, and QFT for recent consoles (PlayStation 5, Xbox Series X). One HDMI output supports eARC so Dolby Atmos and DTS:X streams from a modern TV's apps can be returned to the receiver.

What's in the Box

Denon AVR-A10H receiver

Remote control

Audyssey calibration microphone

External antennas (Wi-Fi/Bluetooth)

AC power cord

Quick start guide