FiiO TT11 - Black - Walnut

Description

Fully Automatic Belt-Drive Turntable

The TT11 is a belt-drive turntable whose fully automatic mechanism handles start, tonearm lower, end-of-record return, and stop, plus a repeat function. The aluminum-alloy tonearm has a counterweight and anti-skate calibrated from 0 to 4 g for tracking-force adjustment. The Audio-Technica AT3600L moving-magnet cartridge is pre-installed and can be swapped later. Physical selectors choose the speed (33 1/3 or 45 RPM) and the record size (7-inch or 12-inch).

Switchable Phono Preamp and Line Output

A PHONO/LINE switch on the rear panel decides whether the RCA outputs carry the preamplified line-level signal or the raw phono signal from the cartridge. In LINE mode, an internal preamplifier built around two Texas Instruments NE5532 op-amps brings the signal to line level for connection to a standard aux input on an amplifier or a pair of active speakers. In PHONO mode, the internal preamp is bypassed and the cartridge signal is sent to an external phono preamplifier or the phono input on an integrated amplifier. Stated line-out signal-to-noise ratio is at least 70 dB.

Bluetooth 5.2 Transmitter and RGB Lighting

A Bluetooth 5.2 transmitter (SBC codec) streams the turntable's output to a wireless headphone, earbud, or Bluetooth speaker. The platter ring includes RGB lighting with seven selectable colors and adjustable brightness. A rear-panel USB-A port is provided for firmware updates.

Construction and Connectivity

The chassis is offered in black or in a walnut wood-grain finish. The aluminum-alloy platter is belt-driven and comes with a platter mat. The aluminum-alloy tonearm has a black electrophoretic finish. The rear panel provides the RCA outputs (L/R), the PHONO/LINE switch, a ground terminal, the record-size selector, a USB-A port for firmware updates, and the AC power inlet. A transparent dust cover and a 45 RPM adapter are included.

Common Questions

Why choose this product?

The TT11 is FiiO's entry-level turntable. It combines a fully automatic mechanism, a pre-installed Audio-Technica AT3600L cartridge, a tonearm with adjustable counterweight and anti-skate, a switchable phono preamp, and a Bluetooth 5.2 transmitter. The transmitter lets you listen through wireless headphones or a Bluetooth speaker in addition to the wired RCA output.

What is the difference between the LINE and PHONO output modes?

In LINE mode, the internal NE5532 phono preamplifier brings the cartridge signal to standard line level, so the RCA output can be connected to an aux input on an amplifier or to a pair of active speakers. In PHONO mode, the internal preamp is bypassed and the RCA output carries the raw cartridge signal, which then needs an external phono preamp or the phono input on an integrated amplifier.

Can the AT3600L cartridge be replaced?

Yes. The aluminum-alloy tonearm accepts a replacement for the pre-installed AT3600L. Both the counterweight and the anti-skate are calibrated from 0 to 4 g, so tracking force can be dialled in to match the new cartridge's specifications.

Which speeds and record sizes are supported?

33 1/3 and 45 RPM are selected via a top-mounted button, and a slide switch chooses the record size (7-inch or 12-inch) so that the automatic mechanism places the tonearm correctly.

What's in the Box

FiiO TT11 turntable

Aluminum-alloy platter with pre-fitted drive belt

Platter mat

Transparent dust cover with hinges

Adjustable counterweight

7-inch / 45 RPM adapter

RCA cable with ground wire

AC power cable

Quick start guide

Warranty card