SVS SB-5000 R | Evolution - Black Ash - Gloss Black

Description

High-Output Reference Subwoofer Performance
The SB-5000 R|Evolution is a sealed-cabinet reference subwoofer engineered to deliver room‑pressurizing low‑frequency output down to 17Hz with precise transient control and tonal accuracy. Designed for both discerning audiophiles and home theater enthusiasts, it combines an all-new 15-inch high‑excursion driver with dual edge‑wound voice coils and a dual monoblock Class D amplifier rated at 2,000 watts continuous and over 5,000 watts peak. This architecture enables effortless sound pressure levels and deep extension without audible distortion, even at reference playback volumes in demanding listening rooms.

Advanced 15-Inch High-Excursion Driver Engineering
At the heart of the SB-5000 R|Evolution is a proprietary 15-inch glass fiber composite cone optimized for a high stiffness‑to‑mass ratio to maintain linear, pistonic motion under extreme excursion. The driver assembly incorporates dual 6-layer bifilar flat edge‑wound aluminum voice coils, a two-piece toroidal ferrite motor, dual Nomex-composite linear suspension spiders, and a proprietary extreme‑excursion parabolic NBR surround to achieve 46.32mm Xmax and 77.44mm Xmech. This combination of motor strength, thermal capacity, and mechanical control allows the 46.3 lb woofer and 38.4 lb motor assembly to deliver visceral bass impact while preserving low distortion and precise timbre.

Dual Mono STA-2000D Amplification and Power Supply
The SB-5000 R|Evolution employs a dual-mono STA-2000D amplifier platform in which each monoblock channel directly drives one of the dual voice coils for maximum control and power transfer. The amplifier delivers 2,000 watts RMS and 5,000+ watts peak through eight 60A, 200V MOSFETs, supported by a high‑efficiency switch mode power supply with full‑range active Power‑Factor‑Correction and onboard AC line conditioning. This power topology maintains a consistent 160V rail voltage from standard 100–240V mains, mitigates waveform distortions and electromagnetic interference, and ensures stable, high-current output and thermal reliability under the most demanding content.

Extreme DSP Control and Intelligent System Management
Signal integrity and system behavior are governed by a 295 MHz Analog Devices DSP engine, featuring double‑precision 56‑bit filtering and advanced digital audio processing with 120 dB signal‑to‑noise ratio DACs. The DSP continuously monitors thermal, voltage, and current conditions while regulating power delivery between the amplifier and power supply to sustain peak performance. Integrated equalization, limiter profiles, and room gain optimization algorithms are tuned specifically for the 5000 Series to preserve linear frequency response from 17Hz to 280Hz (±3 dB) and maintain composure at extreme SPLs in real‑world environments.

Smartphone App Control and Auto EQ Readiness
For convenient optimization, the SB-5000 R|Evolution is compatible with the SVS Subwoofer Control App on Apple iOS, Google Android, and Amazon Fire platforms. The app provides granular control over volume, low‑pass filter, phase, polarity, six parametric EQs, room gain compensation, tuning modes, power management, and three memory presets tailored to music, movies, and night listening. 

Acoustically Inert Sealed Cabinet and Physical Design
The enclosure is a compact sealed box available in Gloss Black and Black Ash finishes, featuring a double‑thick 2-inch MDF front baffle, extensive internal bracing, and acoustic insulation to eliminate cabinet resonance. A protective non‑resonant extra‑thick ABS grille with fabric mesh, screw‑in Iso‑elastomer feet, and a robust MDF construction support high drive levels while minimizing mechanical noise and room‑coupled artifacts. With overall dimensions of 18.3" x 17.8" x 19.5" including grille and an unboxed weight of 102.1 lbs, the SB-5000 R|Evolution is engineered as a dense, acoustically inert platform capable of delivering reference-grade low‑frequency performance in small to mid‑size rooms and beyond.
 

Frequently Asked Questions

What is the difference between the SB-5000 and PB-5000?

The SB-5000 uses a sealed cabinet designed for tight, accurate bass and a more compact footprint. The PB-5000 uses a ported enclosure optimized for deeper extension and higher maximum output.

Is the SB-5000 suitable for music listening?

Yes. The sealed design provides exceptional speed and articulation, making it particularly well suited for high-fidelity music systems.

Can the SB-5000 be controlled from a smartphone?

Yes. The SVS Subwoofer Control App allows users to adjust volume, crossover settings, parametric EQ, phase, and presets directly from a mobile device.

What size room is the SB-5000 best suited for?

The SB-5000 performs particularly well in medium to large listening rooms, where its powerful driver and amplifier can deliver deep and controlled bass.

What's in the Box:

SB-5000 R|Evolution subwoofer
Protective non-resonant extra-thick ABS grille
Iso-elastomer feet 
Extra heavy-duty high-current 6' power cord
Quick Start Guide